Ripple control transmitters


Ripple Control transmitter represents the group of resources emitting Ripple Control signal with defined parameters into distribution network, ij mos common case into 22 kV, 35 kV and 110 kV networks.

Ripple Control transmitters for MV (22 kV and 35 kV) are placed in the substation building. Static frequency converter is placed in the close vicinity of coupling filters. 

22 kV Ripple Control transmitter - coupling transformers + C2 capacitor batteries

Ripple Control transmitters for HV (110 kV) are condstructed with outside only coupling filters. Static converter, C1 capacitor battery and transmitter control are placed in the Ripple Control building where the self-consumption switchboard and 110 kV feeder protection are located as well.
Outside part of coupling filters consists of coupling transformers, C2 capacitor battery, 110 kV grounding switches used to disconnection of coupling transformer from 110 kV network and L2C2 case to optimizinf electrical parameters of coupling filters during summer and winter time if needed.

110 kV Ripple Control transmitter - coupling transformers + C2 capacitor batteries

 

Nowadays the control frequency 183.3 Hz, 191 Hz, 194 Hz1 216.6 Hz and 283.3 Hz are used.

Number of transmitters depend on power transformers. Usually there are up to four Ripple Control blocks. 

 

We are dealing with design, production and delivery of components for all types of Ripple Control transmitters.

 

We produce or supply, install and commision:

  • MV and HV coupling transformers;
  • L2C2 cases for remote regulation of 110 kV coupling transformer taps of regulating winding;
  • capacitor batteries for LV (C1), and MV and HV (C2);
  • Balance protections for HV capacitor batteries;
  • electronic synchronization modul for transmitter control;
  • Ripple Control container transmitters for 22 kV and 35 kV.

 

GALLERY

References

Title Implementation year Detail
Vysílač HDO 22 kV - Jihlava Kosov, Bedřichov a Herolnice, Žďár N. Sázavou, dílčí rekonstrukce vysílače, dodávky a uvedení do provozu 2014 -
Vysílač HDO 110 kV - Krasíkov, výměna balančních ochran BO-08F 2014 -
Vysílač HDO 110 kV - Opočínek, rekonstrukce stání vazebních transformátorů 2014 -
Vysílač HDO 110 kV - Chrást, rekonstrukce vysílačů, dodávka skříní L2C2, oživení a uvedení do provozu 2013 -
Vysílač HDO 22 kV - Č. Ves, Hanušovice, V. Meziříčí, výměna kondenzátorové baterie C2 2013 -
Vysílač HDO 110 kV - Řeporyje, dodávky vazebních filtrů a baterií C1, oživení a uvedení do provozu 2012 -
Vysílač HDO 110 kV - Horní Životice, zastřešení vazebních transformátorů 2012 -
Vysílač HDO 110 kV - Kletné, dodávky vazebních filtrů a baterií C1, oživení a uvedení do provozu 2012 -
Vysílač HDO 110 kV - Kletné, dodávky vazebních filtrů a baterií C1, oživení a uvedení do provozu 2010 -